Hyundai Santa Fe (DM): Charging System Warning Light
This warning light illuminates:
- Once you set the ignition switch or Engine Start/Stop Button to the ON position.
- It remains on until the engine is started. - When there is a malfunction with either the alternator or electrical charging system.
If there is a malfunction with either the alternator or electrical charging system:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the alternator drive belt for looseness or breakage.
If the belt is adjusted properly, there may be a problem in the electrical charging system.
In this case, have your vehicle inspected by an authorized HYUNDAI dealer as soon as possible.
Malfunction Indicator Lamp (MIL)
This warning light illuminates: Once you set the ignition switch or Engine Start/Stop Button to the ON position. - It remains on until the engine is started. When there is a malfunction with the emission ...
Engine Coolant Temperature Warning Light
This warning light illuminates: When the engine coolant temperature is above 120°C (248°F). This means that the engine is overheated and may be damaged. If your vehicle is overheated, refer to “Overheating” ...
See also:
Seat Heater (Non-Air Ventilation). Schematic Diagrams
Circuit Diagram ...
How vehicle audio works
AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then processed by the radio and sent to ...
Repair procedures
Compression Pressure Inspection • If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up and stop engine. Allow the ...
