Hyundai Santa Fe (DM): Components and Components Location - Cylinder Block - Engine Mechanical SystemHyundai Santa Fe (DM): Components and Components Location

Components

1. Piston ring
2. Snap ring
3. Piston
4. Connecting rod
5. Connecting rod upper bearing
6. Piston pin
7. Connecting rod lower bearing
8. Connecting rod bearing cap
9. Ladder frame
10. Oil filter bracket
11. Crankshaft rear oil seal

1. Crankshaft upper bearing
2. Thrust bearing
3. Crankshaft
4. Crankshaft lower bearing
5. Main bearing cap
6. Piston cooling oil jet


Drive Plate. Repair procedures
Removal and Installation 1. Remove the automatic transaxle . 2. Remove the drive plate (A) and the adapter plate (B). Tightening torque : 117.7 ~ 127.5 N.m (12 ~ 13 kgf.m, 86.8 ~ 94.0 lb-ft) • Always ...

See also:

Front Seat Belt Buckle. Repair procedures
Replacement 1. Remove the front seat assembly. 2. Disconnect the front seat belt buckle connector wiring (A). 3. After loosening the mounting nut, then remove the front seat belt buckle (A). Tightening ...

TPMS Sensor. Description and Operation
Description 1. Function A. By detecting the pressure, temperature, acceleration, and battery condition, transmit information to ECU by a wireless RF. B. Wheel location is recognized by comparing with Wheel ...

Engine Room Under Cover. Repair procedures
Removal and Installation 1. Unfasten the fasteners (A) and bolts (B) then remove the engine room under cover (C). Tightening torque: 7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft) 2. Remove the engine ...