Hyundai Santa Fe (DM): Cowl Cross Bar Assembly. Repair procedures
Replacement
|
|
1. |
Remove the cowl top cover.
|
2. |
Remove the main crash pad assembly.
|
3. |
Disconnect the steering column connectors.
|
4. |
Down the steering column after loosening the mounting bolts.
|
5. |
Disconnect the blower unit connectors.
|
6. |
After loosening the mounting bolts, then remove the rear air duct
(A).
|
7. |
Disconnect the passenger compartment junction box connectors (A).
|
8. |
Disconnect the multi box connectors (A).
[Driver's]
[Passenger's]
|
9. |
Disconnect the airbag control module (SRSCM) connector (A).
|
10. |
Disconnect the connector (A) and the mounting clips in the front
pillar.
[Driver's]
[Passenger's]
|
11. |
Loosen the BCM (Body Control Module) mounting bolt (A).
|
12. |
Disconnect the ICM relay box connector (A).
|
13. |
After loosening the mounting bolts and nuts, then remove the cowl
cross bar assembly (A).
|
14. |
Install in the reverse order of removal.
|
Cowl Cross Bar Assembly. Components and Components Location
Component Location 1. Cowl cross bar assembly ...Roof Trim
...See also:
Compass function
The Compass can be turned ON and OFF and will remember the last state when the ignition is cycled. To turn the display feature ON/OFF: 1. Press and release the button to turn the display feature OFF. 2. ...
Power Door Lock Actuators. Repair
procedures
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. 2. Remove the front door module. 3. Disconnect the connectors from the actuator. 4. Check actuator operation by connecting power ...
Roof Antenna. Repair procedures
Removal 1. Remove the rear roof trim. 2. Disconnect the roof antenna connectors (A) from the roof antenna. 3. Remove the roof antenna (A) after removing a nut. Installation 1. Connect the roof antenna ...