Hyundai Santa Fe (DM): Crankshaft Position Sensor (CKPS). Repair procedures
Inspection
1. |
Check the signal waveform of the CMPS and CKPS using the GDS.
|
Removal
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Disconnect the crankshaft position sensor connector (A).
|
3. |
Remove the protector (A).
|
4. |
Remove the installation bolt (A), and then remove the crankshaft
position sensor.
|
Installation
|
|
|
1. |
Install in the reverse order of removal.
|
Crankshaft Position Sensor (CKPS). Schematic Diagrams
Circuit Diagram ...Camshaft Position Sensor (CMPS). Description and Operation
Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the piston position ...See also:
Cooling Fan. Components and Components Location
Components 1. Upper air guard 2. PWM module 3. Cooling fan shroud 4. Fan motor 5. Cooling fan ...
Intake Air Temperature Sensor (IATS). Schematic Diagrams
Circuit Diagram ...
Intake And Exhaust System
Air Cleaner. Repair procedures Removal and Installation Air Cleaner Assembly 1. Disconnect the battery negative terminal. 2. Remove the engine cover. (Refer to Engine And Transaxle Assembly - “Engine ...