Hyundai Santa Fe (DM): Crash Pad Under Cover. Repair procedures - Crash Pad - Body (Interior and Exterior)Hyundai Santa Fe (DM): Crash Pad Under Cover. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
After loosening the mounting screws, then remove the crash pad under cover [RH] (A).

2.
Install in the reverse order of removal.
•
Replace any damaged clips.

Crash Pad Side Cover. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Crach Pad Center Panel. Components and Components Location
Component Location 1. Crash pad center lower panel ...

See also:

Fuel Pressure Control Valve. Troubleshooting
Signal Waveform ...

Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures recommended ...

Components and Components Location
Components (1) 1. Main crash pad assembly 2. Crash pad side cover [LH] 3. Crash pad side cover [RH] 4. Steering column shroud lower panel 5. Crash pad lower panel 6. Fuse box cover 7. Crash pad under cover ...