Hyundai Santa Fe (DM): Cylinder Head Cover. Components and Components Location - Cylinder Head Assembly - Engine Mechanical SystemHyundai Santa Fe (DM): Cylinder Head Cover. Components and Components Location

Hyundai Santa Fe DM 2013-2018 Service Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head Cover. Components and Components Location

Components

1. Cylinder head cover
 2. Gasket


Repair procedures
Valve Clearance Inspection And Adjustment Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C (68°F)) and cylinder head is installed on the cylinder block. ...

Cylinder Head Cover. Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Remove the engine cover. 3. Remove the air duct and air cleaner assembly. 4. Disconnect the exhaust OCV (Oil control valve) connector (A). 5. Disconnect ...

See also:

Trailer brakes
If your trailer is equipped with a braking system, make sure it conforms to federal and/or local regulations and that it is properly installed and operating correctly. If your trailer weight exceeds the ...

CVVT & Camshaft. Repair procedures
Removal 1. Remove the cylinder head cover. 2. Set No.1 cylinder to TDC/compression. A. Turn the crankshaft pulley and align its groove with the timing mark "T" of the lower timing chain cover. ...

ESC OFF Switch. Repair procedures
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the crash pad side switch assembly (A) after loosening the screws. 4. ...