Hyundai Santa Fe (DM): Delta Garnish. Repair procedures - Body Side Molding - Body (Interior and Exterior)Hyundai Santa Fe (DM): Delta Garnish. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the delta garnish (A).
2.
Install in the reverse order of removal.
•
Replace any damaged clips.

Roof Rack. Repair procedures
Replacement [General Type] • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent ...

Rear Spoiler. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

See also:

Operating door locks from inside the vehicle
With the door lock button To unlock a door, push the door lock button(1) to the “Unlock” position. The red mark (2) on the button will be visible. To lock a door, push the door lock button(1) to the ...

Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels aligned ...

Variable Intake Solenoid (VIS) Valve. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve terminals 1 and 2. Specification: Refer to "Specification" Removal 1. ...