Hyundai Santa Fe (DM): Description and Operation
Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch,
connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and
energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch
pinion engages the ring gear.
The contacts close and the starter motor cranks.
In order to prevent damage caused by excessive rotation of the starter
armature when the engine starts, the clutch pinion gear overruns.
|
1. Solenoid 2. Brush assembly 3. Armature 4. Over runing clutch |
Starting System
...
Troubleshooting
Troubleshooting • The battery must be in good condition and fully charged for this troubleshooting. ...
See also:
Canister Close Valve (CCV). Specifications
Specification Item Specification Coil Resistance (Ω) 19.9 ~ 22.9 [20°C(68°F) ...
Removal and installation
To remove the headrest : 1. Raise it as far as it can go then press the release button (1) while pulling the headrest up (2). To reinstall the headrest : 1. Put the headrest poles (3) into the holes while ...
Dimensions
...
