Hyundai Santa Fe: Description and Operation - Hands Free System - Body Electrical SystemHyundai Santa Fe: Description and Operation

Function

Audio Bluetooth System
General Features
•
This audio system supports Bluetooth® hands-free and stereo-headset features.
-
HANDS-FREE feature : Making or receiving calls wirelessly.
-
STEREO-HEADSET feature : Playing music from cellular phones (that supports A2DP feature) wirelessly.
•
The phone must be paired to the system before using Bluetooth® features.
•
Only one selected (connected) cellular phone can be used with the system at a time.
•
Some phones are not fully compatible with this system.

Components and Components Location
Components 1. Hands free call switch 2. Mic 3. Front left speaker 4. Front right speaker 5. Audio head unit (hands free control) ※ There is no hands free jack. This system supports Bluetooth(wireless ...

Hands Free Switch. Schematic Diagrams
Circuit Diagram ...

See also:

Line Pressure Control Solenoid Valve. Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...

Heated Repair procedures
Inpection 1. Measure a resistance of NTC and Heated pad. A. NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C) B. Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω ± 10% 2. Measure ...

Repair procedures
Component Replacement After Deployment Before doing any SRS repairs, use the GDS to check for DTCs. Refer to the Diagnostic Trouble Code list for repairing of the related DTCs. When the front airbag(s) ...