Hyundai Santa Fe (DM): Description and Operation
Description
Back view camera will activate when the backup light is ON
with the ignition switch ON and the shift lever in the R position.
This system is a supplemental system that shows behind the
vehicle through the AV monitor or the ECM (Reverse Display Room Mirror) mirror
while backing-up.
This system is a supplementary function only. It
is the responsibility of the driver or always check the inside/ outside
rearview mirror and the area behind the vehicle before and while backing
up because there is a dead zone that can't see through the camera.
|
Подробная информация vpn to unblock websites на нашем сайте.
Schematic Diagrams
Circuit Diagram ...
Repair procedures
Removal 1. Remove the tailgate trim. 2. Remove the tailgate back panel. 3. Disconnector the connector (A) from the back view camera. 4. Remove the back view camera (B) after loosening the screws (2EA). ...
See also:
LCD Modes
❈ For controlling the LCD modes, refer to "LCD Display Control" in this chapter. ❈ For "Trip Computer" mode, refer to "Trip Computer" in this chapter. ...
Repair procedures
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. 2. Remove the front door module. 3. Disconnect the connectors from the actuator. 4. Check actuator operation by connecting power ...
EBD(Electronic Brake-force Distribution). Description and Operation
Operation The EBD system (Electronic Brake force Distribution) as a sub-system of the ABS system is to control the maximum braking effectiveness by the rear wheels. It further utilizes the efficiency of ...
