Hyundai Santa Fe (DM): Door Garnish. Repair procedures - Body Side Molding - Body (Interior and Exterior)Hyundai Santa Fe (DM): Door Garnish. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the front door module.
2.
Remove the rear door module.
3.
After loosening the mounting nuts, then remove the front door garnish (A) and rear door garnish (B).
4.
Install in the reverse order of removal.
•
Replace any damaged clips.

Quarter Garnish. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Front Wheel Guard. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

See also:

Radiator. Repair procedures
Removal and Installation 1. Disconnect the battery terminals. 2. Remove the air cleaner assembly. 3. Remove the under cover.   4. Loosen the drain plug, and drain the coolant. Remove the radiator ...

Troubleshooting
Troubleshooting Symptom Possible cause Remedy One lamp does not light (all exterior) Bulb burned out Replace bulb Socket, wiring or ground faulty Repair if necessary Head lamps do not light Bulb burned ...

ATF Warmer. Components and Components Location
Component Location 1. ATF Warmar 2. Bypass valve 3. ATF hose&pipe 4. Coolant hose&pipe Component 1. ATF Warmar 2. Bypass valve 3. ATF hose&pipe 4. Coolant hose&pipe ...