Hyundai Santa Fe (DM): Door Scuff Trim. Repair procedures - Interior Trim - Body (Interior and Exterior)Hyundai Santa Fe (DM): Door Scuff Trim. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the front door scuff tirm (A).
[Front]
2.
Using a screwdriver or remover, remove the rear door scuff tirm (A).
[Rear]
3.
Install in the reverse order of removal.
•
Replace any damaged clips.

Door Scuff Trim. Components and Components Location
Component Location 1. Front door scuff trim 2. Rear door scuff trim ...

Cowl Side Trim. Components and Components Location
Component Location 1. Cowl side trim ...

See also:

General Information. Repair procedures
Compression Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up and stop engine. Allow the engine to warm up ...

Knock Sensor (KS). Schematic Diagrams
Circuit Diagram ...

Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “clicks” one time. This indicates that the cap is securely tightened. 2. Close the fuel filler lid and push it in lightly making sure that it is securely ...