Hyundai Santa Fe (DM): Dynamic Damper. Repair procedures - Driveshaft Assembly - Driveshaft and axleHyundai Santa Fe (DM): Dynamic Damper. Repair procedures

Removal

1.
Remove the front driveshaft.
2.
Remove the TJ joint assembly.
3.
Remove the remove the both side of band (B) of the dynamic damper (A).

4.
Fix the driveshaft (A) with a vice (B) as illustrated.

5.
Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper when the dynamic damper is removed.
6.
Seperate the dynamic damper (A) from the shaft (B) carefully.


Installation

1.
Apply soap powder on the shaft to prevent being damaged between the shaft spline and the dynamic damper.
2.
Install the dynamic damper.
3.
Install the dynamic damper band (A).
4.
Using the SST(09495-3K000), secure the TJ boot bands (B).

Clearance (A): 2.0 mm (0.0787 in.) or less

5.
Install the TJ joint assembly.
6.
Install the front driveshaft.
7.
Check the front alignment.

Dynamic Damper. Components and Components Location
Components 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Retainer ring 12. TJ housing 13. ...

BJ Boot. Components and Components Location
Components 1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly 11. Retainer ring 12. TJ housing 13. ...

See also:

Specifications
Specifications Items Bulb Type Bulb Wattage (W) Front Head lamp Low H11 55 High H7 55 Turn signal lamp PY28W 28 Position lamp LED LED Side marker W5W 5 Fog lamp H8 35 Rear Rear combination lmap Turn signal ...

Rear Bumper beam Assembly. Components and Components Location
Component Location 1. Rear bumper beam assembly ...

Front Washer Motor. Repair procedures
Inspection Front and Rear Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. Before filling the reservoir tank with water, check the filter for foreign ...