Hyundai Santa Fe (DM): Emergency Fastening Device (EFD). Description and Operation
Description
The Emergency Fastening Device (EFD) operates as well as the belt pretensioner
at the same time, if it gets into its deploy condition after a collision. It
is located near the anchor on the front seat and it is an equipment to make
up for the existing short stroke. The front seat belt EFD is an auxiliary equipment
to prevent the driver and passenger from breaking away doubly as the seat belt
is pulled towards the anchor side after a collision.
Never measure resistance of EFD directly, current of measuring
device may cause unexpected airbag deploy.
|
Seat Belt Pretensioner (BPT). Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Left side - Remove the seat belt lower anchor cover (A). After loosening the mounting bolt, ...See also:
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can be used to identify ...
Water Temperature Control Assembly. Components and Components
Location
Components 1. O-ring 2. Water temperature control assembly 3. Water inlet fitting 4. Engine coolant temperature sensor 5. Thermostat 6. Thermostat gasket 7. Oil cooler coolant hose ...
Repair procedures
Operation and Leakage Check Check all of the following items: Component Procedure Brake Booster (A) Check brake operation by applying the brakes during a test drive. If the brakes do not work properly, ...