Hyundai Santa Fe (DM): Engine Mounting. Components and Components
Location
Components
|
1. Transaxle mounting bracket 2. Roll rod bracket |
3. Engine mounting bracket 4. Engine mounting support bracket |
Engine Room Under Cover. Repair procedures
Removal and Installation 1. Unfasten the fasteners (A) and bolts (B) then remove the engine room under cover (C). Tightening torque: 7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf.m, 5.7 ~ 8.6 lb-ft) 2. Remove the engine ...
Engine Mounting. Repair procedures
Removal and Installation Roll road Bracket 1. Remove the roll road bracket(A). Tightening torque Bolt (B) : 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) Bolt (C) : 107.9 ~ 127.5 N.m (11.0 ~ 13.0 ...
See also:
Door locks
Operating door locks from outside the vehicle Mechanical key [A] : Unlock, [B] : Lock First, pull the outside door handle (1) and push the hook (2) located inside of outside door handle by using the mechanical ...
Ignition System
Description and operation Description The ignition coil is a kind of small transformer that transforms the battery voltage to 30 kV or more to create a spark in the spark plug gap in the cylinder. The ...
Outside Rear View Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
