Hyundai Santa Fe (DM): ESC OFF Switch. Repair procedures
Inspection
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
|
| 2. |
Remove the crash pad lower panel.
|
| 3. |
Remove the crash pad side switch assembly (A) after loosening
the screws.
|
| 4. |
Check the continuity between the switch terminals as the ESC OFF
switch is engaged.
|
ESC OFF Switch. Description and Operation
Description 1. The ESC OFF switch is for the user to turn off the ESC system. 2. The ESC OFF lamp is on when ESC OFF switch is engaged. ...
DBC Switch. Description and Operation
Description The DBC function is the acronym word of Downhill Brake Control function. When a vehicle goes down the hill, just pushing the DBC switch enables the car to keep its vehicle's speed at a ...
See also:
Power brakes
Your vehicle has power-assisted brakes that adjust automatically through normal usage. In the event that the power-assisted brakes lose power because of a stalled engine or some other reason, you can still ...
Components and Components Location
Components Location 1. Receiver 2. TPMS Sensor (FL) 3. TPMS Sensor (RL) 4. TPMS Sensor (RR) 5. TPMS Sensor (FR) ...
Engine Mounting. Repair procedures
Removal and Installation Roll road Bracket 1. Remove the roll road bracket(A). Tightening torque Bolt (B) : 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) Bolt (C) : 107.9 ~ 127.5 N.m (11.0 ~ 13.0 ...
