Hyundai Santa Fe (DM): ETC (Electronic Throttle Control) System. Repair procedures
Inspection
Throttle Position Sensor (TPS)
1. |
Connect the GDS on the Data Link Connector (DLC).
|
2. |
Start the engine and measure the output voltage of TPS 1 and 2
at C.T. and W.O.T.
|
3. |
Turn the ignition switch OFF and disconnect the scantool from
the DLC.
|
4. |
Disconnect the ETC module connector and measure the resistance
between the ETC module terminals 1 and 2.
|
ETC Motor
1. |
Turn the ignition switch OFF.
|
2. |
Disconnect the ETC module connector.
|
3. |
Measure resistance between the ETC module terminals 3 and 6.
|
4. |
Check that the resistance is within the specification.
|
Removal
1. |
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
|
2. |
Remove the resonator and the air intake hose.
(Refer to Engine Mechanical System - "Air Cleaner")
|
3. |
Disconnect the ETC module connector (A).
|
4. |
Disconnect the coolant hoses (B).
|
5. |
Remove the installation bolts (C), and then remove the ETC module
from the engine.
|
Installation
|
1. |
Install in the reverse order of removal.
|
ETC (Electronic Throttle Control) System. Schematic Diagrams
Circuit Diagram ...Manifold Absolute Pressure Sensor (MAPS). Description and Operation
Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog signal proportional ...See also:
Intake Air Temperature Sensor (IATS). Description and Operation
Description Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction of the air temperature ...
Roller Blind Motor. Repair procedures
Replacement 1. Refer to the inspection procedure in the panorama sunroof motor. ...
Special Service Tools
Special Service Tools Tools (Number and name) Illustration Use 09431-45100 Oil seal installer Installation of transfer case oil seal. (Right side) 09473-3B100 Oil seal installer Installation of transfer ...