Hyundai Santa Fe (DM): External Amplifier. Repair procedures - AVN System - Body Electrical SystemHyundai Santa Fe (DM): External Amplifier. Repair procedures

Removal

External Amplifier
1.
Remove the passenger seat assembly.
2.
Remove the external amplifier (A) after disconnecting the connectors and loosening the mounting bolts (3EA).


Installation

External Amplifier
1.
Install the external amplifier after connecting the connector.
2.
Install the passenger seat assembly.
-
Make sure the speaker and related connectors are plugged in properly.

External Amplifier. Components and Components Location
Components Connector Pin Information No. Connector A (26 pin) Connector B (16 pin) Connector C (12 pin) 1 Battery + Right surround speaker + Rear right door + 2 Battery + Left surround speaker + Rear left ...

See also:

Crach Pad Center Panel. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Components and Components Location
Components 1. Rear door pull cap 2. Rear door trim 3. Rear door module 4. Rear door latch 5. Rear door panel 6. Rear door belt inside weatherstrip 7. Rear door belt outside weatherstrip 8. Rear door delta ...

Rear Seat Belt Buckle. Repair procedures
Replacement [Second row seat belt buckle] • Before removing the second row seat assembly [LH/RH], first remove the second row center seat belt buckle (A) and seat assembly [RH](B). 1. Place the second ...