Hyundai Santa Fe (DM): Fan speed control
The ignition switch must be in the ON position for fan operation.
The fan speed control knob allows you to control the fan speed of the air flowing from the ventilation system. To change the fan speed, turn the knob to the right for higher speed or left for lower speed.
Setting the fan speed control knob to the “0” position turns off the fan.
Air intake control
This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position The indicator light on the ...
To turn off the blowers
To turn off the blowers, turn the fan speed control knob to the “0” position. ...
See also:
Battery. Components and Components Location
Components 1. Battery insulation pad 2. Battery 3. Battery tray 4. Battery mounting bracket ...
Automatic Transaxle. Repair procedures
Removal 1. Remove the engine cover. 2. Remove the air cleaner assembly and air duct. 3. Remove the battery and battery tray. 4. Disconnect the inhibitor switch connect (A) and solenoid valve connector ...
Hood Seal Weatherstrip. Repair procedures
Replacement 1. Detach the clips, then remove the hood seal weatherstrip (A). • Be careful not to scratch the hood seal weatherstrip. 2. Install in the reverse order of removal. • Replace any damaged ...
