Hyundai Santa Fe (DM): Flex Steer. Repair procedures - Steering wheel - Steering SystemHyundai Santa Fe (DM): Flex Steer. Repair procedures

Inspection

1.
Check the audio remote control switch (A) for resistance between terminals in each switch position.

Switch
Connector terminal
Resistance (В±5%)
Cancel
2-7
180 Ω
Set
2-7
330 Ω
Resume
2-7
550 Ω
Cruise
2-7
880 Ω
S/Limit
2-7
1.44 kΩ
Flex steer
2-7
180 Ω


Replacement

1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver airbag module.
3.
Remove the steering wheel.
4.
Disengage the steering wheel remote control switch assembly.
5.
Remove the remote control switch (A) and (B).

6.
Install in the reverse order of removal.

Flex Steer. Schematic Diagrams
Circuit Diagram ...

See also:

Battery. Components and Components Location
Components 1. Battery insulation pad 2. Battery 3. Battery tray 4. Battery mounting bracket ...

26 Brake Control Solenoid Valve(26/B_VFS). Specifications
Specifications Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81~500.14 (0.1~5.1, 1.42~72.54) Current value(mA) 50~850 Internal resistance(Ω) ...

Front fog lamp bulbs
If the lamp bulb does not operate, have the vehicle checked by an authorized HYUNDAI dealer. ...