Hyundai Santa Fe (DM): Floor Console
Muffler. Repair procedures Vehicle certification label Hood Latch. Components and Components Location
Replacement 1. Remove the cap (A) and remove the nuts, then remove the wiper arm (B). Tightening torque : 22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft) 2. Detach the clips, then remove the fender ...
Repair procedures
Components [M/T] 1. Front console garnish [LH] 2. Front console garnish [RH] 3. Console upper cover 4. Ash tray 5. Console rear complete assembly 6. Console front complete assembly 7. Console side cover ...
Components and Components LocationSee also:
Removal and Installation 1. Remove the front muffler (A). Tightening torque: 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft) 2. Remove the center muffler (A). Tightening torque: 39.2 ~ 58.8 N.m (4.0 ...
The vehicle certification label attached on the driver’s side center pillar gives the vehicle identification number (VIN). ...
Component Location 1. Hood upper latch assembly 2. Hood lower latch assembly ...
