Hyundai Santa Fe (DM): Front Body. Body Repair
Front Body A
|
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Front Body B
|
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Front Body C
|
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Front Body D
|
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
Front Body E
|
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
|
|
|
|
|
Hood hinge mounting hole (Ø9) |
Fender apron upper panel corner |
Fender apron upper panel tooling hole (7X12) |
|
|
|
|
|
Fender panel mounting hole (Ø6.6) |
Front shock absorber mounting hole (Ø14) |
Windshield wiper motor & linkage mounting hole (Ø6.6) |
|
|
|
|
|
Front pillar outer corner |
Windshield glass side bracket mounting hole (Ø5) |
Engine mounting bracket hole (Ø13) |
|
|
|
|
|
Transaxle mounting hole (Ø15) |
Engine mounting bracket hole (Ø13) |
Transaxle mounting hole (Ø15) |
|
|
|
|
|
Front side member tooling hole (Ø11) |
Front side member tooling hole (Ø11) |
Front end module mounting hole (Ø13) |
|
|
|
|
|
Front end module mounting hole (Ø9) |
|
|
General Information
General 1. Basically, all measurements in this manual are taken with a tracking gauge. 2. When a measuring tape is used, check to be sure there is no elongation, twisting or bending. 3. For measuring dimensions, ...
Side Body. Body Repair
Side Body A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side Body B * These dimensions indicated in this figure are actual-measurement dimensions. ...
See also:
Components
and Components Location
Components ...
Parking brake
Checking the parking brake Check whether the stroke is within specification when the parking brake pedal is depressed with 66 lb (30 kg, 294 N) of force. Also, the parking brake alone should securely hold ...
Rear Driveshaft. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...
