Hyundai Santa Fe (DM): Front Door Module. Repair procedures - Front Door - Body (Interior and Exterior)Hyundai Santa Fe (DM): Front Door Module. Repair procedures

Replacement

1.
Remove the front door window glass.
2.
Remove the front door outside handle.
3.
Disconnect the front door main connector (A).
4.
Loosen the front door outside handle base mounting bolt (A).
5.
Disconnect the outside rear view mirror connector (A).
6.
Loosen the front door latch (B) mounting screws.
7.
After loosening the mounting bolts, then remove the front door module (A).
Tightening torque :
Bolt : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)
Screw : 7.8 ~ 10.8 N.m (0.8 ~ 1.1 kgf.m, 5.8 ~ 8.0 lb-ft)

8.
Disconnect the connectors and front door module wiring harness (A).
9.
Disconnect the front door latch connector (A).
10.
Install in the reverse order of removal.
•
The area of whole parts should be applied with sufficient grease.
•
Make sure connectors are connected properly and each rod is connected securely.
•
Make sure the door locks/unlocks and opens/closes properly.

Front Door Module. Components and Components Location
Component Location 1. Front door module ...

Front Door Outside Handle. Components and Components Location
Component Location 1. Front door outside handle ...

See also:

Rear Driveshaft. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub. Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...

Front Driveshaft. Components and Components Location
Components 1. Front driveshaft (LH) 2. Inner shaft bearing bracket 3. Front driveshaft (RH) [LH] 1. BJ assembly 2. Clip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ ...

Daytime running light
Daytime Running Lights (DRL) can make it easier for others to see the front of your vehicle during the day. DRL can be helpful in many different driving conditions, and it is especially helpful after dawn ...