Hyundai Santa Fe (DM): Front Door Outside Handle. Repair procedures - Front Door - Body (Interior and Exterior)Hyundai Santa Fe (DM): Front Door Outside Handle. Repair procedures

Replacement

1.
Remove the hole plug (B).
2.
After loosening the mounting bolt, then remove the front door outside handle cover (A).
Tightening torque :
7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

3.
Remove the front door outside handle (A) by sliding it rearward.
4.
Disconnect the front door outside handle connector (A).
5.
Install in the reverse order of removal.
•
Make sure the connector is connected properly.
•
Make sure the door locks/unlocks and opens/closes properly.

Front Door Outside Handle. Components and Components Location
Component Location 1. Front door outside handle ...

Front Door Latch. Components and Components Location
Component Location 1. Front door latch ...

See also:

Smart key precautions
The smart key will not work if any of the following occur: - The smart key is close to a radio transmitter such as a radio station or an airport which can interfere with normal operation of the smart ...

Changing the coolant
Have coolant changed by an authorized HYUNDAI dealer according to the Maintenance Schedule at the beginning of this section. CAUTION Put a thick cloth or fabric around the radiator cap before refilling ...

Transaxle Oil Temperature Sensor. Schematic Diagrams
Circuit Diagram ...