Hyundai Santa Fe (DM): Front Impact Sensor (FIS). Components and Components Location - SRSCM - RestraintHyundai Santa Fe (DM): Front Impact Sensor (FIS). Components and Components Location

Hyundai Santa Fe DM 2013-2018 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS). Components and Components Location

Components


Front Impact Sensor (FIS). Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of ...

Front Impact Sensor (FIS). Repair procedures
Removal • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connector, disconnect the front airbag ...

See also:

SRS Care
The SRS is virtually maintenancefree and so there are no parts you can safely service by yourself. If the SRS air bag warning light "" does not illuminate, when you turn the ignition on, or continuously ...

Seat belts - Front passenger and rear seat 3-point system with combination locking retractor
To fasten your seat belt: Combination retractor type seat belts are installed in the rear seat positions to help accommodate the installation of child restraint systems. Although a combination retractor ...

Components and Components Location
Components 1. Front seat headrest 2. Front seat headrest guide 3. Front seat back cover 4. Front seat back warmer pad 5. Front seat back pad 6. Front seat back frame assembly 7. Front seat back board 8. ...