Hyundai Santa Fe (DM): Front Mud Guard. Repair procedures - Body Side Molding - Body (Interior and Exterior)Hyundai Santa Fe (DM): Front Mud Guard. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, then remove the front mud guard (A).
2.
Install in the reverse order of removal.
•
Replace any damaged clips.

Rear Wheel Guard. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Rear Mud Guard. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

See also:

Components and Components Location
Components 1. Rear bumper cover 2. Rear bumper beam assembly 3. Rear bumper beam cover 4. Rear bumper side bracket [LH] 5. Rear bumper side bracket [RH] 6. Rear bumper lower side bracket ...

Front Impact Sensor (FIS). Components and Components Location
Components ...

Luggage net (holder)
Type A Type B To keep items from shifting in the cargo area, you can use the four holders located in the cargo area to attach the luggage net. If necessary, contact your authorized HYUNDAI dealer to obtain ...