Hyundai Santa Fe (DM): Front Oil Seal. Repair procedures - Timing System - Engine Mechanical SystemHyundai Santa Fe (DM): Front Oil Seal. Repair procedures

Removal and Installation

1.
Remove the crankshaft damper pulley.
2.
Remove the front oil seal(A).

3.
Install the crankshaft front oil seal (A) using SST (09214-3K000, 09231-H1100) (B).


Crankshaft Damper Pulley. Repair procedures
Removal and Installation 1. Remove the drive belt. 2. Remove the passenger engine room side cover. 3. Remove the passenger front tire. 4. Remove the crankshaft damper pulley(A). Tightening torque : 166.6 ...

Timing Chain Cover. Repair procedures
Removal • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. Mark all wiring and hoses to avoid misconnection. ...

See also:

Front Door Module. Components and Components Location
Component Location 1. Front door module ...

Troubleshooting
Troubleshooting Ignition System Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignition lock switch, or replace as required Ignition coil ...

Air bag warning label
Air bag warning labels, some required by the U.S. National Highway Traffic Safety Administration (NHTSA), are attached to alert the driver and passengers of potential risks of the air bag system. ...