Hyundai Santa Fe (DM): Front Pillar Trim. Components and Components Location - Interior Trim - Body (Interior and Exterior)Hyundai Santa Fe (DM): Front Pillar Trim. Components and Components Location

Component Location

1. Front pillar trim



Cowl Side Trim. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Front Pillar Trim. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

See also:

Propeller Shaft. Repair procedures
Removal 1. After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A). Tightening torque: 49.0 ~ 68.6N.m (5.0 ~ 7.0kgf.m, 36.1 ~ 50.6lb-ft) 2. Remove ...

26 Brake Control Solenoid Valve(26/B_VFS). Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...

Opening the tailgate
The tailgate is locked or unlocked when all doors are locked or unlocked with the key, transmitter, smart key or central door lock switch. If unlocked, the tailgate can be opened by pressing the handle ...