Hyundai Santa Fe (DM): Front Pillar Trim. Repair procedures - Interior Trim - Body (Interior and Exterior)Hyundai Santa Fe (DM): Front Pillar Trim. Repair procedures

Replacement

•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Using a screwdriver or remover, remove the front pillar trim (A).
2.
Install in the reverse order of removal.
•
Replace any damaged clips.

Front Pillar Trim. Components and Components Location
Component Location 1. Front pillar trim ...

Center Pillar Trim. Components and Components Location
Component Location 1. Center pillar lower trim 2. Center pillar upper trim ...

See also:

Cylinder Head. Components and Components Location
Components 1. Cylinder head 2. Intake OCV (Oil Control Valve) 3. Exhaust OCV (Oil Control Valve) 4. MLA 5. Retainer lock 6. Retainer 7. Valve spring 8. Valve stem seal 9. Valve ...

Blade inspection
✽ NOTICE Commercial hot waxes applied by automatic car washes have been known to make the windshield difficult to clean. Contamination of either the windshield or the wiper blades with foreign ...

Downhill brake control (DBC)
The Downhill Brake Control (DBC) assists the driver when descending a steep hill without the driver depressing the brake pedal. It slows the vehicle to under approximately 6.3 mph (10 km/h) and lets the ...