Hyundai Santa Fe (DM): Front Seat Belt Buckle. Repair procedures - Front Seat Belt - Body (Interior and Exterior)Hyundai Santa Fe (DM): Front Seat Belt Buckle. Repair procedures

Replacement

1.
Remove the front seat assembly.
2.
Disconnect the front seat belt buckle connector wiring (A).
3.
After loosening the mounting nut, then remove the front seat belt buckle (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

4.
Install in the reverse order of removal.
•
Make sure the connector is plugged in properly.
•
Replace any damaged clips.

Front Seat Belt Buckle. Components and Components Location
Component Location 1. Front seat belt buckle ...

Rear Seat Belt
...

See also:

Components and Components Location
Components 1. Camshaft bearing cap 2. Camshaft front bearing cap 3. Exhaust camshaft 4. Intake camshaft 5. Exhaust CVVT assembly 6. Intake CVVT assembly 7. Exhaust camshaft upper bearing 8. Exhaust camshaft ...

Camshaft Position Sensor (CMPS). Description and Operation
Description Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element. It is related with Crankshaft Position Sensor (CKPS) and detects the piston position ...

ICM (Integrated Circuit Module) Relay Box. Description and Operation
Description The ICM relay is united with (rear blower motor, cornering lamp, rear fog lamp, two turn unlock, burglar alram relay) which installed inside the lower crash pad. ...