Replacement
•
|
Put on gloves to protect your hands.
|
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
•
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
•
|
Take care not to bend or scratch the trim and panels.
|
|
1. |
Remove the front seat assembly.
|
2. |
After loosening the mounting screw, then remove the front seat
shield inner cover (A).
|
3. |
Install in the reverse order of removal.
• |
Replace any damaged clips.
|
|
|
Component Location 1. Front seat shield inner cover ...
Component Location 1. Front seat back cover ...
See also:
Seat Belt Warning Light
This warning light informs the driver that the seat belt is not fastened. For more details, refer to the “Seat Belts” in chapter 3. ...
If engine stalls while driving
1. Reduce your speed gradually, keeping a straight line. Move cautiously off the road to a safe place. 2. Turn on your emergency flashers. 3. Try to start the engine again. If your vehicle will not start, ...
Hazard Lamp Switch. Repair procedures
Inspection 1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to diagnose defects of hazard lamp switch ...