Hyundai Santa Fe (DM): Front Washer Motor. Repair procedures
Inspection
1. |
With the washer motor connected to the reservoir
tank, fill the reservoir tank with water.
|
2. |
Connect positive (+) battery cables to terminal 3
and negative (-) battery cables to terminal 1 respectively.
|
3. |
Check that the motor operates normally and the washer
motor runs and water sprays from the front nozzles.
|
4. |
If they are abnormal, replace the washer motor.
[Front & Rear washer]
|
1. |
Disconnect the negative(-) battery terminal.
|
2. |
Drain the washer fluid less than 650 cc.
|
3. |
Check for continuity between the No. 1 and No.2 terminal
in each float position.
There should be continuity when the float is down.
There should be no continuity when the float is up.
|
4. |
If the continuity is not as specified, replace the
washer fluid level switch
|
Removal
|
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front bumper cover.
|
3. |
Remove the washer hose and disconnect the washer
motor connector and washer fluid level sensor connector.
|
4. |
Remove the washer motor (A).
|
5. |
Remove the washer reservoir after removing bolts
(A).
|
Installation
1. |
Reassemble the washer reservoir.
|
2. |
Connect the washer motor connector and washer hose.
|
3. |
Install the washer reservoir.
|
4. |
Reassemble the front bumper cover.
|
Front Wiper Motor. Repair procedures
Removal 1. Loosen the windshield wiper arm nut after removing a wiper cap (A). 2. Remove the windshield wiper arm and blade (B) 3. If necessary, release the wiper blade fixing clip by pulling up and remove ...See also:
Side impact air bag
❈ The actual air bags in the vehicle may differ from the illustration. Your vehicle is equipped with a side impact air bag in each front seat. The purpose of the air bag is to provide the vehicle's ...
Seat Belt Pretensioner (BPT). Description and Operation
Description The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce ...
Direct Electro Hydraulic Actuator Coupling. Description and Operation
Description 4WD ECU processes signals from various sensors and determines the current road and driving conditions. The ECU then utilizes this information to implement precision control over the 4WD coupling's ...