Hyundai Santa Fe (DM): Fuel Delivery System
- Components and Components Location
- Repair procedures
- Fuel Tank. Repair procedures
- Fuel Pump. Repair procedures
- Fuel Filter. Repair procedures
- Fuel Pump Motor. Repair procedures
- Fuel Sender. Repair procedures
- Fuel Pressure Regulator. Repair procedures
- Fuel Line. Repair procedures
- Filler-Neck Assembly. Repair procedures
- Accelerator Pedal. Repair procedures
- Delivery Pipe. Repair procedures
- High Pressure Fuel Pump. Repair procedures
Canister Close Valve (CCV). Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specification. Specification: ...Components and Components Location
Components Location 1. Fuel tank 2. Fuel pump 3. Fuel filter 4. Fuel pressure regulator 5. Canister 6. Fuel tank air filter 7. Fuel tank band 8. Fuel tank pressure sensor (FTPS) 9. Canister close valve ...See also:
Master Cylinder. Repair procedures
Removal 1. Turm ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly. 3. Disconnect the brake fluid level switch connector (B), and remove the reservoir ...
If you have a flat tire while driving
If a tire goes flat while you are driving: 1. Take your foot off the accelerator pedal and let the car slow down while driving straight ahead. Do not apply the brakes immediately or attempt to pull off ...
Warning Messages
Shift to "P" position (for smart key system and automatic transaxle) This warning message illuminates if you try to turn off the engine without the shift lever in P (Park) position. At this time, ...