Hyundai Santa Fe (DM): Fuel Filler Door Release Actuator. Repair procedures
Inspection
| 1. |
Remove the left luggage side trim.
|
| 2. |
Remove the subwoofer.
|
| 3. |
Remove the fuel filler housing after opening the
fuel filler door.
|
| 4. |
Loosen the fuel filler actuator mounting bolts (2EA).
|
| 5. |
Remove the fuel filler door release actuator (A)
after disconnecting the fuel filler door release actuator connector
(A).
|
| 6. |
Check for continuity between terminal No. 1 and No.
2. If there is no continuity, replace the fuel filler door release actuator
(A).
|
Components and Components Location
Component Location 1. Fuel filler door open switch 2. Fuel filler door release actuator ...
Fuel Filler Door Open Switch. Repair
procedures
Inspection 1. Remove the front door trim. 2. Disconnect the switch connector (A) from wiring. 3. Check the switch for continuity between the No. 1 and No. 2 terminals. If the continuity is not as specified, ...
See also:
Aux, USB and iPod® port
If your vehicle has an aux and/or USB(universal serial bus) port or iPod® port, you can use an aux port to connect audio devices and a USB port to plug in a USB, or use the HYUNDAI accessory iPod® cable ...
Warning and Caution Labels
Warning and Caution Labels 1. Radiator cap caution 2. Fan caution 3. Battery caution Battery Caution Label Warning / Caution Label (Cont'd) A. Keep lighted cigarettes and all other flames or sparks ...
SS-A Solenoid Valve(ON/OFF). Specifications
Specifications ON/OFF Solenoid Valve(SS-A) ▷ Control type : Normal low type Control pressure kpa (kgf/cm², psi) 490.33(5.0, 71.12) Internal resistance(Ω) 10~11 ...
