Hyundai Santa Fe (DM): Fuel Pressure Control Valve. Repair procedures - Engine Control System - Engine Control/Fuel SystemHyundai Santa Fe (DM): Fuel Pressure Control Valve. Repair procedures

Inspection

1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
4.
Check that the resistance is within the specification.
Specification: Refer to “Specification”

Fuel Pressure Control Valve. Schematic Diagrams
Circuit Diagram ...

Canister Close Valve (CCV). Description and Operation
Description Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage detecting system ...

See also:

General Information. Troubleshooting
Troubleshooting Symption Suspect area Remedy Engine misfire with abnormal internal lower engine noises. Worn crankshaft bearings Loose or out of specification engine flywheel Replace the crankshaft and ...

Battery. Specifications
Specification Item Specification Model type CMF68L-BCI Capacity [20HR/5HR] (AH) 68 / 54 Cold Cranking Amperage (A) 600 (SAE) / 480 (EN) Reserve Capacity (Min) 110 ...

Variable Intake Solenoid (VIS) Valve. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve terminals 1 and 2. Specification: Refer to "Specification" Removal 1. ...