Hyundai Santa Fe (DM): Fuel Pressure Regulator. Repair procedures - Fuel Delivery System - Engine Control/Fuel SystemHyundai Santa Fe (DM): Fuel Pressure Regulator. Repair procedures

Removal

1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Release the fixing hooks, and then remove the regulator cup (A).

3.
Remove the fuel pressure regulator (A).


Installation

1.
Install in the reverse order of removal.

Fuel Sender. Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Release the fixing hooks, and then remove the fuel sender (A). Installation ...

Fuel Line. Repair procedures
Removal 1. Turn the ignition switch OFF, and then remove battery (-) cable. 2. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”) ...

See also:

Repair procedures
Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3. If continuity is not specified, ...

Rear Hub - Carrier. Components and Components Location
Components 1. Rear carrier assembly 2. Parking brake assembly 3. Rear hub assembly 4. Rear brake disc ...

Starter. Specifications
Specification Starter Item Specification Rated voltage 12 V, 1.2 kW The number of pinion teeth 11 Performance [No-load, 11 V] Ampere Max. 70 A Speed Min. 2,400 rpm ...