Hyundai Santa Fe (DM): Fuse/Relay panel description
Inside the fuse/relay box covers, you can find the fuse/relay label describing fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to your vehicle. It is accurate at the time of printing. When you inspect the fuse box on your vehicle, refer to the fuse box label.
Multi fuse
If the multi fuse is blown, it must be removed as follows: 1. Disconnect the negative battery cable. 2. Remove the bolts shown in the picture above. 3. Replace the fuse with a new one of the same rating. ...
See also:
Steering Gear box. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) • Be careful not to damage to the hub bolts when removing the ...
Flex Steer. Description and Operation
Instruction Flex Steer is system to choose the three modes power steering depending on driver preference or driving conditions. • Display on the cluster but power steering is would not changed while ...
Hands Free Switch. Repair procedures
Inspection 1. Check for resistance between terminals in each switch position. [Bluetooth] Switch Connector terminal Resistance (± 5%) End 2-5 12.1 kΩ Send 2-5 34.1 kΩ [Bluetooth + Voice] Switch ...
