Hyundai Santa Fe (DM): Glove Box Housing. Components and Components Location
Component Location
|
1. Glove box housing |
|
Crash Pad Lower Panel. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
Glove Box Housing. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...
See also:
Audio Unit. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the center air vent duct (A). 3. Seperate the audio head unit (A) from crash pad after loosening the screws (4EA). 4. Remove the audio ...
Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 in. (1.6 mm) of tread left on the tire. Replace the tire when this happens. ...
Parking Assist Sensor. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. 3. Disconnect the connector (B) from the parking assist sensor (A). 4. Pull out the sensor (A) by opening the sensor ...
