Hyundai Santa Fe (DM): Hazard Lamp Switch. Repair procedures
Inspection
| 1. |
The SJB can be diagnosed by using the GDS. The SJB
communicates with the GDS which then displays inputs and outputs along
with codes.
It will be able to diagnose defects of hazard lamp
switch with GDS quickly. GDS can operates actuator forcefully, input/output
value monitoring and self diagnosis.
|
| 2. |
To diagnose the SJB function, select the vehicle
model, BCM and SJB.
|
| 3. |
To consult the present input/out value of SJB, "Current
DATA". It provides information of SJB input/output conditions.
|
Removal
| 1. |
Disconnct the negative (-) battery terminal.
|
| 2. |
Remove the audio unit or AVN head unit.
|
| 3. |
Remove the heat & A/C control module unit.
|
Installation
| 1. |
Install the heater & A/C control module unit.
|
| 2. |
Install the audio or AVN head unit.
|
| 3. |
Connect the negative (-) battery terminal.
|
Door Mood Lamp. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim. 3. Disconnect the door mood lamp connectors (A). 4. Remove the door mood lamp (A) after loosening the screws (3EA). ...
Rheostat. Repair procedures
Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad side cover. 3. Remove the lower crash pad switch assembly (A) after loosening the screws (3EA). 4. Remove the rheostat ...
See also:
SS-A Solenoid Valve(ON/OFF). Description and Operation
Description SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-A Solenoid valve(ON/OFF) is installed at valve body. ...
Air intake control
This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, push the control button. Recirculated air position The indicator light on the ...
To defrost outside windshield
1. Set the temperature to the extreme hot (HI) position. 2. Set the fan speed to the highest (extreme right) position. 3. Press the defrost button (). 4. The outside (fresh) air position will be selected ...
