Hyundai Santa Fe (DM): Headrest (for rear seat) - Rear seat adjustment - Seats - Safety features of your vehicleHyundai Santa Fe (DM): Headrest (for rear seat)

The rear seat(s) is equipped with headrests in all the seating positions for

The rear seat(s) is equipped with headrests in all the seating positions for the occupant's safety and comfort.

The headrest not only provides comfort for passengers, but also helps to protect the head and neck in the event of a collision.

WARNING - Headrest adjustment

  • For maximum effectiveness in case of an accident, the headrest should be adjusted so the middle of the headrest is at the same height as the center of gravity of an occupant's head. Generally, the center of gravity of most people's head is similar with the height of the top of their eyes. Also adjust the headrest as close to your head as possible. For this reason, the use of a cushion that holds the body away from the seatback is not recommended.
  • Do not operate the vehicle with the headrests removed. Severe injury to an occupant may occur in the event of an accident. Headrests may provide protection against severe neck injuries when properly adjusted.
  • Do not adjust the headrest height while the vehicle is in motion.
Seatback angle
To recline the seatback: 1. Pull up the seatback recline lever. 2. Hold the lever and adjust the seatback of the seat to the position you desire. 3. Release the lever and make sure the seatback is locked ...

Adjusting the height up and down
To raise the headrest : 1. Pull it up to the desired position (1). To lower the headrest : 1. Push and hold the release button (2) on the headrest support 2. Lower the headrest to the desired position ...

See also:

Power outlet
Front Center Rear The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 10 amps with ...

Seat belts
This section describes how to use the seat belts properly. It also describes some of the things not to do when using seat belts. Seat belt safety precautions Always fasten your seat belt and make sure ...

Rear Shock Absorber. Repair procedures
Removal 2WD 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the rear ...