Hyundai Santa Fe (DM): Heated Oxygen Sensor (HO2S). Description and Operation
Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Manifold Catalytic Converter. The sensor
output voltage varies in accordance with the air/fuel ratio.
The sensor must be hot in order to operate normally. To keep it hot, the
sensor has a heater which is controlled by the ECM via a duty cycle signal.
When the exhaust gas temperature is lower than the specified value, the heater
warms the sensor tip.
Самая подробная информация lovegra купить алматы на сайте.
Knock Sensor (KS). Repair procedures
Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold") 3. Disconnect the ...Heated Oxygen Sensor (HO2S). Specifications
Specification HO2S [Bank 1/Sensor 1] Item Specification Heater Resistance (Ω) 2.5 ~ 4.0 [20°C(68°F)] HO2S [Bank 1/Sensor 2] A/F Ratio (λ) Output Voltage(V) RICH Approx. 0.9 LEAN Approx. 0.04 ...See also:
ICM (Integrated Circuit Module)
Relay Box. Components and Components Location
Component ...
Components and Components Location
Components 1. Front seat belt pretensioner / EFD system 2. Height adjuster 3. Second row seat belt 4. Third row seat belt ...
Panorama Sunroof Assembly. Components and Components Location
Components Location 1. Panorama sunroof assembly ...