Hyundai Santa Fe (DM): Heated Repair procedures - Steering wheel - Steering SystemHyundai Santa Fe (DM): Heated Repair procedures

Inpection

1.
Measure a resistance of NTC and Heated pad.
A.
NTC resistance(Black / Yellow, Black) - 10.0 kΩ ± 10% (25°C)
B.
Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω ± 10%
2.
Measure a temperature.
A.
The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute
B.
The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute
C.
At that time switch on, all measure point (1~8)


Heated Schematic Diagrams
System Circuit Diagram Terminal Function Housing Pin Function Wire color Pad A GND Back B HEATER Yellow C NTC+ Back / Yellow D NTC- Back Remote control A GND Back B BAT Red C LED Green D SWITCH White ...

Flex Steer. Components and Components Location
Components Location 1. Flex steer switch ...

See also:

Light bulbs
WARNING - Working on the lights Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the “LOCK”position and turn off the lights to avoid sudden ...

Camshaft Position Sensor (CMPS). Troubleshooting
Wave Form ...

Components and Components Location
Component Location 1. Audio unit 2. Tweeter speaker 3. Roof antenna (Radio+SDARS) 4. Front door speaker 5. Rear door speaker 6. Antenna feeder cable 7. Antenna cable connector ※ SDARS : Satellite ...