Hyundai Santa Fe (DM): Height Adjust. Repair procedures - Front Seat Belt - Body (Interior and Exterior)Hyundai Santa Fe (DM): Height Adjust. Repair procedures

Replacement

1.
Remove the front seat belt upper anchor.
2.
After loosening the mounting bolts, then remove the height adjust (A).
Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

3.
Install in the reverse order of removal.
•
Replace any damaged clips.

Height Adjust. Components and Components Location
Component Location 1. Height adjust ...

Front Seat Belt Buckle. Components and Components Location
Component Location 1. Front seat belt buckle ...

See also:

Repair procedures
Compression Pressure Inspection    • If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure. 1. Warm up and stop engine. Allow the ...

Troubleshooting
Trouble Symptom Charts Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surging" (repeated alternating acceleration ...

Side Airbag (SAB) Module. Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the front seat assembly. 3. Remove the seat back assembly. The side airbag cannot be disassembled ...