Hyundai Santa Fe (DM): High mounted stop lamp replacement
1.Open the tailgate.
2.Gently remove the center cover of the rear tailgate trim.
3.Disconnect the electrical connector.
4.Loosen the retaining nuts and remove the spoiler.
5.Remove the high mounted stop lamp assembly (A) after loosening the nuts and
washer nozzle (B).
6.Reinstall a new lamp assembly in the reverse order of removal.
Inside lamp
1. Open the tailgate. 2. Remove the service cover using a flat-blade screwdriver. 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with ...
License plate lamp bulb replacement
1. Loosen the lens retaining screws with a screwdriver. 2. Remove the lens. 3. Remove the bulb. 4. Install a new bulb. 5. Reinstall the lens securely with the lens retaining screws. ...
See also:
Front Seat Assembly. Components and Components Location
Component Location 1. Front seat assembly ...
Heated Description and Operation
Description Heated pads to grip the steering grip makes the fever. 1. Heated control unit 2. Heated pad Specifications Item Specification Voltage 13.5 V Heated pad resistance 1.4 ~ 1.8 Ω Â± ...
Front Door Belt Inside Weatherstrip. Repair procedures
Replacement 1. Remove the front door trim. 2. Remove the front door belt inside weatherstrip (A). 3. Install in the reverse order of removal. • Replace any damaged clips. ...
