Hyundai Santa Fe (DM): Hood Assembly. Components and Components Location - Hood - Body (Interior and Exterior)Hyundai Santa Fe (DM): Hood Assembly. Components and Components Location

Component Location

1. Hood assembly


Repair procedures
Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjust the hood height by turning the hood overslam bumpers (C). 3. After loosening ...

Hood Assembly. Repair procedures
Replacement • Be careful not to damage the hood and body. • When removing and installing the hood, an assistant is necessary. • When removing the clips, use a clip remover. 1. Using a screwdriver, ...

See also:

Roller Blind. Repair procedures
Replacement [Removal] 1. Open the roller blind using the panorama sunroof switch. • Leave 10 ~ 20cm (0.3937 ~ 0.7874 in) of the roller blind unopened. 2. Remove the roof trim. 3. Remove the roller blind ...

Front Wiper Motor. Repair procedures
Removal 1. Loosen the windshield wiper arm nut after removing a wiper cap (A). 2. Remove the windshield wiper arm and blade (B) 3. If necessary, release the wiper blade fixing clip by pulling up and remove ...

Water pump. Repair procedures
Removal and Installation 1. Loosen the drain plug, and then drain the engine coolant. Remove the radiator cap to help drain the coolant faster. 2. Remove the drive belt after turning the drive belt tensioner ...