Hyundai Santa Fe (DM): Hood Assembly. Repair procedures - Hood - Body (Interior and Exterior)Hyundai Santa Fe (DM): Hood Assembly. Repair procedures

Replacement

•
Be careful not to damage the hood and body.
•
When removing and installing the hood, an assistant is necessary.
•
When removing the clips, use a clip remover.
1.
Using a screwdriver, lift the socket clips (A) up slightly on both ends of the lifter (B).
2.
After loosening the hood hinge (B) mounting bolts, remove the hood assembly (A).
Tightening torque :
21.6 ~ 26.5 N.m (2.2 ~ 2.7 kgf.m, 15.9 ~ 19.5 lb-ft)

3.
Install in the reverse order of removal.
•
Make sure the hood locks/unlocks and opens/closes properly.
•
Adjust the hood alignment.

Hood Assembly. Components and Components Location
Component Location 1. Hood assembly ...

Hood Lift. Repair procedures
Replacement • When removing and installing the hood lifter, an assistant is necessary. • When removing the clips, use a clip remover. 1. Using a screwdriver, lift the socket clips (A) up slightly on ...

See also:

Components and Components Location
Components 1. Telematic unit (TMU) 2. BlueLink keypad 3. Roof Antenna 4. AUX jack 5. AVN or Audio head unit 6. External amplifier 7. Mic ...

Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. To reduce the possibility ...

Components and Components Location
Components 1. HECU module 2. Front wheel speed sensor 3. Rear wheel speed sensor 4. Yaw rate & Lateral G sensor 5. ABS Warning lamp 6. Parking brake/EBD warning lamp 7. ESC Function/Warning lamp 8. ...