Hyundai Santa Fe (DM): Hood Insulator Pad. Repair procedures - Hood - Body (Interior and Exterior)Hyundai Santa Fe (DM): Hood Insulator Pad. Repair procedures

Replacement

1.
Using a clip remover, detach the clips, and remove the hood insulator pad (A).
•
Be careful not to scratch the hood panel.

2.
Install in the reverse order of removal.
•
Replace any damaged clips.

Hood Lift. Repair procedures
Replacement • When removing and installing the hood lifter, an assistant is necessary. • When removing the clips, use a clip remover. 1. Using a screwdriver, lift the socket clips (A) up slightly on ...

Hood Seal Weatherstrip. Repair procedures
Replacement 1. Detach the clips, then remove the hood seal weatherstrip (A). • Be careful not to scratch the hood seal weatherstrip. 2. Install in the reverse order of removal. • Replace any damaged ...

See also:

To turn cruise control off, do one of the following
Press the CRUISE button (the CRUISE indicator light in the instrument cluster will go off). Turn the ignition off. Both of these actions cancel cruise control operation. If you want to resume cruise control ...

Delta Garnish. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Front Stabilizer Bar. Repair procedures
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...