Hyundai Santa Fe (DM): Hood Latch. Components and Components Location
Component Location
|
1. Hood upper latch assembly |
2. Hood lower latch assembly |
Hood Latch Release Handle. Repair procedures
Replacement 1. Using a screwdriver or remover, remove the hood release handle (A). • Use a 6mm hex bit to press the center until the handle easily pulls off the post. 2. Install in the reverse order ...
Hood Latch. Repair procedures
Replacement [Hood upper latch assembly] 1. After loosening the mounting bolts, then remove the hood upper latch assembly (A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 2. Install ...
See also:
Front Seat Belt Pretensioner. Components and Components Location
Component Location 1. Front seat belt pretensioner ...
Inhibitor Switch. Description and Operation
Description Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals. ...
Auto defogging system
Auto defogging reduces the probability of fogging up the inside of the windshield by automatically sensing the moisture of inside the windshield. The auto defogging system operates when the heater or ...
