Hyundai Santa Fe (DM): Hood Latch Release Handle. Components and Components Location - Hood - Body (Interior and Exterior)Hyundai Santa Fe (DM): Hood Latch Release Handle. Components and Components Location

Hyundai Santa Fe DM 2013-2018 Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle. Components and Components Location

Component Location

1. Hood latch release handle


Hood Weatherstrip. Repair procedures
Replacement 1. Remove the hood weatherstrip (A). • Be careful not to scratch the hood weatherstrip. 2. Install in the reverse order of removal. ...

Hood Latch Release Handle. Repair procedures
Replacement 1. Using a screwdriver or remover, remove the hood release handle (A). • Use a 6mm hex bit to press the center until the handle easily pulls off the post. 2. Install in the reverse order ...

See also:

Tail Gate Back Panel. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Windshield defrosting and defogging
WARNING - Windshield heating Do not use the or position during cooling operation in extremely humid weather. The difference between the temperature of the outside air and that of the windshield could cause ...

Description and Operation
Description EPS (Electronic power steering, Column assist type) system uses an electric motor to assist the steering force and it is an engine operation independent steering system. EPS control module ...