Hyundai Santa Fe (DM): Ignition Coil. Repair procedures - Ignition System - Engine Electrical SystemHyundai Santa Fe (DM): Ignition Coil. Repair procedures

Removal

1.
Disconnect the battery nagative terminal.
2.
Remove the engine cover.
3.
Disconnect the ignition coil connector (A).

•
When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

4.
Remove the ignition coil (A).

Installation

1.
Install in the reverse order of removal.
Ignition coil installation bolts:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)

Inspection

1.
Measure the primary coil resistance between terminals (+) and (-).

Standard value: 0.62Ω ± 10%

Ignition Coil. Schematic Diagrams
Circuit Diagram ...

Spark Plug. Description and Operation
Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture therein by means ...

See also:

Flex Steer. Repair procedures
Inspection 1. Check the audio remote control switch (A) for resistance between terminals in each switch position. Switch Connector terminal Resistance (±5%) Cancel 2-7 180 Ω Set 2-7 330 Ω ...

Knee Airbag (KAB) Module. Description and Operation
Description The Knee Airbag (KAB) is installed inside the crash pad lower panel and protects the driver in the event of a frontal crash. The SRSCM determines if and when to deploy the KAB. Never attempt ...

Seat cushion height (for driver’s seat)
To change the height of the seat cushion, push the lever upwards or downwards. To lower the seat cushion, push the lever down several times. To raise the seat cushion, pull the lever up several times. ...